HiCapa 4.3 TDC Split Slide Kit
Designed with speed in mind, we are happy to announce the release of the split slide kit for the TM 4.3 HiCapa
This slide features:
* Integrated front & rear fiber sights
* TDC hop adjustment
* Internal front thread
This kit is lightweight. The moving rear portion assembled with bbu and nozzle weighs in at ~45g. With this in mind, the kit does require you to use an early cutoff bbu (we love the Edge) to lower the volume of gas used, however this does make this into a very efficient build. The only other part required is a stronger nozzle return spring (we love the AIP 140%).
During testing we have run a number of hop rubbers including the stock, PDI W-Hold, Maple Leaf and even the brand new 4AUD. This kit is designed around the stock hop unit, and while you can run the TDC setup, you can continue to run the stock arm should you prefer.
HPA: We have tested this kit on HPA running upto 110psi.
Gas: This kit will work with stock mags. Please be mindful of pressure and temperature. As such, we recommend ASG ultraair which is around the 110psi mark.
Slide lock: For users wishing to use gas mag, slight modification to the stock slide catch due to enhanced cycle speed a relocation of the lock cutout which is now further forward on the slide. This is a simple process requiring filing of the catch to make a more aggressive angle to enhance upward pressure. See our YouTube channel for info.
The kit includes:
* Slide
* Hop adjustment grub screws (fitted)
* Hop plate
* M0.9 allen key
* Rear BBU Screw
* Top BBU screw
Our kits are printed in Nylon using MJF technology.
INSTALLATION: https://youtu.be/pYaNFHqOs_o?si=w72A2ZnWWRqPAZjt
This product is brought to you by Custom Airsoft Design
Designed with speed in mind, we are happy to announce the release of the split slide kit for the TM 4.3 HiCapa
This slide features:
* Integrated front & rear fiber sights
* TDC hop adjustment
* Internal front thread
This kit is lightweight. The moving rear portion assembled with bbu and nozzle weighs in at ~45g. With this in mind, the kit does require you to use an early cutoff bbu (we love the Edge) to lower the volume of gas used, however this does make this into a very efficient build. The only other part required is a stronger nozzle return spring (we love the AIP 140%).
During testing we have run a number of hop rubbers including the stock, PDI W-Hold, Maple Leaf and even the brand new 4AUD. This kit is designed around the stock hop unit, and while you can run the TDC setup, you can continue to run the stock arm should you prefer.
HPA: We have tested this kit on HPA running upto 110psi.
Gas: This kit will work with stock mags. Please be mindful of pressure and temperature. As such, we recommend ASG ultraair which is around the 110psi mark.
Slide lock: For users wishing to use gas mag, slight modification to the stock slide catch due to enhanced cycle speed a relocation of the lock cutout which is now further forward on the slide. This is a simple process requiring filing of the catch to make a more aggressive angle to enhance upward pressure. See our YouTube channel for info.
The kit includes:
* Slide
* Hop adjustment grub screws (fitted)
* Hop plate
* M0.9 allen key
* Rear BBU Screw
* Top BBU screw
Our kits are printed in Nylon using MJF technology.
INSTALLATION: https://youtu.be/pYaNFHqOs_o?si=w72A2ZnWWRqPAZjt
This product is brought to you by Custom Airsoft Design
Designed with speed in mind, we are happy to announce the release of the split slide kit for the TM 4.3 HiCapa
This slide features:
* Integrated front & rear fiber sights
* TDC hop adjustment
* Internal front thread
This kit is lightweight. The moving rear portion assembled with bbu and nozzle weighs in at ~45g. With this in mind, the kit does require you to use an early cutoff bbu (we love the Edge) to lower the volume of gas used, however this does make this into a very efficient build. The only other part required is a stronger nozzle return spring (we love the AIP 140%).
During testing we have run a number of hop rubbers including the stock, PDI W-Hold, Maple Leaf and even the brand new 4AUD. This kit is designed around the stock hop unit, and while you can run the TDC setup, you can continue to run the stock arm should you prefer.
HPA: We have tested this kit on HPA running upto 110psi.
Gas: This kit will work with stock mags. Please be mindful of pressure and temperature. As such, we recommend ASG ultraair which is around the 110psi mark.
Slide lock: For users wishing to use gas mag, slight modification to the stock slide catch due to enhanced cycle speed a relocation of the lock cutout which is now further forward on the slide. This is a simple process requiring filing of the catch to make a more aggressive angle to enhance upward pressure. See our YouTube channel for info.
The kit includes:
* Slide
* Hop adjustment grub screws (fitted)
* Hop plate
* M0.9 allen key
* Rear BBU Screw
* Top BBU screw
Our kits are printed in Nylon using MJF technology.
INSTALLATION: https://youtu.be/pYaNFHqOs_o?si=w72A2ZnWWRqPAZjt
This product is brought to you by Custom Airsoft Design
